get_bf.m
get_bf.m [Sequoia, April 5, 2011] This MATLAB script allows the LISST-100 or LISST-100X user to compute the part of the forward scattering coefficient, bf, covered by the angle ranges of the LISST-100X. See the application note ‘Angles...
News
How is ppm related to concentration
[Sequoia, April 5, 2011] ppm vs concentration in mg/l or µl/l? How is ppm related to concentration? ppm means parts-per-million. But what parts? The amount of particles in a suspension can be expressed as the total volume OR total mass of particles in...
LISST Bin Sizes for inversions based on randomly shaped grains
Size Bins for use with Matrices based on Randomly Shaped Grains [Sequoia, March 18, 2011] The tables below tabulate the values for the Type B and C size bins for inversions based on Sequoia’s matrices for randomly shaped particles....
The Influence of Particles Outside the Size Range of the LISST
The Influence of Particles Outside the Size Range of the LISST [Sequoia, February 23, 2011] A question that Sequoia often gets asked is: What happens when the suspension contains particles outside the measurement range? The short answer...
Adjusting your LISST data when using a PRM
A 50% PRM Adjusting your LISST data when you are using a PRM [Sequoia, April 13, 2008] When using a LISST-100X or LISST-STX with an Optical Path Reduction Module (PRM) in place, it is necessary to be aware of two facts:1) It is very...